The NBE-5AC-Gen2 NanoBeam ac High-Performance airMAX Bridge from Ubiquiti Networks directs RF energy in a tight beamwidth. It maximizes and improves noise immunity by its uniform bandwidth and also blocks or spatially filters out noise. This feature helps in areas crowded with other RF signals of the same or similar frequency.
The Nanobeam ac combines the radio and antenna in an efficient and compact unit that gets maximum gain out of the smallest footprint. It features an innovative mechanical design and high speed processor for optimal performance at low cost.
All-in-One Design
- The NanoBeam ac provides both the radio and antenna in the smallest possible footprint.
- Quick Assembly
- No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting.
- Convenient Alignment
- The NanoBeam ac pivots on its ball joint for easy aiming.
- Efficient Footprint
- The radio and antenna are combined into a single body that takes up minimal space.
- Versatile Mounting
- The NanoBeam ac can be mounted in almost any position needed for line of sight.
- Aesthetics
- The NanoBeam ac is small enough to blend discreetly into the background at a customer’s location.
General Specifications | |
---|---|
Processor | Atheros MIPS 74Kc, 720 MHz |
Memory | 128 MB DDR2, 8 MB flash |
Networking Interface | 1 x 10/100/1000 Ethernet port |
Antenna | |
---|---|
Gain | 19 dBi |
Polarization | Dual linear |
Operating Frequency | 5150 to 5875 MHz 5725 to 5850 MHz |
Wind Loading | 45.4 N @ 200 km/h (10.2 lbf @ 125 mph) |
Wind Survivability | 200 km/hour (125 mph) |
LED Indicator Specifications | |
---|---|
LEDs | 1 x Power 1 x LAN 4 x WLAN |
Signal Strength LEDs | Software-adjustable to correspond to custom RSSI levels |
Channel Size Support | |
---|---|
PtP Mode | 10/20/30/40/50/60/80 MHz |
PtMP Mode | 10/20/30/40 MHz |
Environmental | |
---|---|
Operating Temperature | -40 to +158°F (-40 to +70°C) |
Operating Humidity | 5 to 95% (non-condensing) |
Reviews
There are no reviews yet.