Ubiquiti BulletM2-HP 2.4ghz

9,500.00 KSh +VAT

Bullet M is a wireless radio with an integrated Type N RF connector that can be directly plugged in to any Antenna* to create a powerful and robust outdoor Access Point, Client, or Bridge

Out of stock

Description

Ubiquiti Bullet M2-HP – 2.4GHz WiFi CPE
Ubiquiti Bullet M2-HP instantly transform any WiFi antenna into a 2.4 GHz carrier class radio system.

Bullet M2 is the latest version of the popular Ubiquiti Bullet. Like its predecessor, Bullet-M2 is a wireless radio with an integrated N male connector that can be directly plugged in to any Antenna with N female socket to create a powerful and robust outdoor Access Point, Client, or Bridge.

– No radio card / host board issues
– No RF cable quality concerns
– No mechanical stability concerns
– No enclosure mounting requirements

The Bullet M2HP features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a robust weatherproof design.

With up to 600mW of power and enhanced receiver design, the Bullet M2 is ideal for long-distance links, capable of 100Mbps+ real TCP/IP speeds over multi-km distances.

The Bullet-M2HP can instantly become a powerful TDMA BaseStation utilizing Ubiquiti’s breakthrough AirMax technology. With AirMax, PtMP networks can scale gracefully while maintaing high throughput and low latency performance.

Passive PoE
Using PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the Bullet-M2 to your network enviroment. There is no need to to install any extra wired power cord. The PoE Injector is NOT included. Compatible PoE Injectors are available at out webshop.

Downloads:

Technical Datasheet

AirOS Manual

Technical Data:

Manufacturer / Product: Ubiquiti Networks / Bullet M2 High Power
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Operating System: AirOS
Networking Interface: 1 x 10/100 BASE-TX (Cat. 5, RJ-45)
Frequency Band: 2.4 GHz (Standard)
Supported WLAN Standards: IEEE 802.11b: 11 Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11n: 150Mbps
Network modes: Access point, Access Point WDS, Station, Station WDS, Bride Mode, Router Mode
TX Power: 28dBm>
RX Sensitivity: -min. -97dBm
TCP/IP Throughput: 100Mbps+
Antenna Connector: N-male plug (connects directly to antenna)
max. Power Consumption: 7 Watt
Power Method: Passive Power over Ethernet
PoE Injector is not included!
Power Input: 12V – 24V
Appliance: In- and Outdoor
Dimensions: 15.2cm x 3.1cm x 3.7cm
Weight: 0.18 kg
Operating Temperature: -40°C to +80°C
Operating Humidity: 5 to 95% non condensing
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ubiquiti BulletM2-HP 2.4ghz”

Your email address will not be published. Required fields are marked *