Netis WF2520 300Mbps Wireless N High Power Ceiling-Mounted Access Point (IEEE 802.3af&at PoE)
The netis WF2520 300Mbps Wireless N High Power Ceiling-Mounted Access Point provides long range, high performance wireless Internet access over large areas.It provides you multiple wireless modes including Access Point, AP Router, Client, WDS, Repeater, and WISP, for flexible wireless network setup and deployment. Also, with the 802.3af&at PoE design, you may easily establish a solution where electrical socket is unavailable or hard to reach. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.
Ceiling-Mounted Design
WF2520’s ceiling-mounted appearance makes it easy to be installed to the wall or ceiling surface.
Multiple Operation Mode
Availability for Various Network Applications
WF2520 supports AP(Default), AP Router, and WISP as operation modes. And under AP Router mode, it provides Access Point, Client, WDS, AP+WDS, Client+Repeater modes for various wireless solutions. Based on your current network structure, you can flexibly choose a suitable wireless mode to build or extend the wireless network.
High Power
Penetrate Walls and Eliminate Dead Zones
With the advanced high Power Amplifiers (PA) and Low Noise Amplifier (LNA) technology, WF2520 provides powerful Wi-Fi coverage that easily penetrates walls and Wi-Fi obstructions to provide Wi-Fi coverage in hard to reach areas. It is great for larger homes, backyards, offices, hotels and warehouses.
PoE Supported (802.3af & at)
WF2520 powered by an Ethernet cable which transmits data and electricity at the same time, to allow you to locate the Access Point in a position even the power slot is not available.You may feel much convenient to get the best signal and coverage when building the wireless network.
| Wireless | |
| Standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Signal Rate | Up to 300Mbps |
| Frequency Range | 2.4-2.4835GHz |
| Transmit Power | <20dBm (For countries using CE Standards) <30dBm (For countries using FCC Standards) |
| Data Transfer Rates | 802.11n: 40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps) 20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense) 801.11g: (54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps) 802.11b: (11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps) |
| Wireless Modes | Access Point, Client, WDS, AP+WDS, Client+Repeater |
| Wireless Security | WEP (64/128-bit), WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK Mixed Mode SSID Broadcast Enable/Disable MAC Address Filtering |
| Hardware | |
| Standards | IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3af, IEEE802.3at |
| Interface | WAN/PoE: 10/100Mbps Auto MDI/MDIX RJ45 LAN port, 802.3af&at PoE Supported LAN: 10/100Mbps Auto MDI/MDIX RJ45 LAN port, |
| LED Indicators | System, Wi-Fi |
| Buttons | RESET |
| Antenna | 2* Internal Antenna |
| Power Supply | 802.3af&at PoE |
| Software | |
| Operation Modes | AP, AP Router, WISP |
| WAN Connection Types | DHCP, Static IP,PPPoE, Russia PPPoE, L2TP/Russia L2TP, PPTP/Russia PPTP |
| Port Forwarding | Virtual Servers, UPnP, DMZ |
| QoS | Bandwidth Control |
| Access Control | MAC Filtering |
| Others | Dynamic DNS, Firmware Upgrade, Backup & Restore |
| Others | |
| Certification | FCC, CE |
| Environment | Operating Temperature: 0℃~40℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Package | 1* WF2520 1* Mounting Kit 1* Ethernet Cable 1* Quick Installation Guide |
Reviews
There are no reviews yet.